Application
1. post-tensioning of the anchor can be used efficiently in all applications of Building and Civil Engineering works including
A. Building floor slabs B. Bridge girders C. Many other applications
2. post-tensioning of the anchor is commonly used in bridge construction as well as other civil Engineering structures such as Silo, Water tank etc.
3. The strands are individually gripped in one anchorage unit and transmit their prestressing force by means of anchor plate casting unit type M.
4. For each anchor size a special spiral reinforcement is provided at the anchor plate casting to give adequate splitting reinforcement for burstling stresses developed at the anchorage zone.
5. The strands in the tendon are stressed simultaneously by means of a multi-strand stressing jack from capacity 1,100 KN up to 5,000 KN. In case of small size tendon units such as type M405 the strands can also be stressed individually by means of a mono jack.
6. To ensure corrosion protection and to give adequate bond strength, the tendons are filled with suitable cement grout mix after complete stressing of the strands.
| SPECIFICATION |
| Description |
505 Anchor Block |
505 Wedge Block |
| Material |
Cast iron |
Cast iron |
| Weight |
3.8kg |
2.3kg |
| Length |
203.4mm |
190mm |
| Height |
200mm |
45mm |
| Width |
79.3mm |
45mm |
Anchorage in Prestressed Concrete
Anchorage as the name signifies is a component of post-tensioning system which is used to anchor the tendons into the concrete while terminating or joining two tendons. Main function of anchorage is to transfer the stressing force to the concrete once the stressing process is completed.
It is one of the most important 5 components of post-tensioning systems. Anchorage is an inevitable part of the prestressing system. The efficiency of anchorages affects the service life of a prestressed structure.
Components of Anchorages
Important components of Anchorage are Anchor plate or anchor head, Removable grouting cap, Iron Block/force transfer unit, Bursting reinforcement, Deviation cone and duct coupler. The prestressing force is applied to the strands and locked in place by the wedges in the anchor head which is supported on the force transfer unit cast into the concrete.
The force transfer unit ensures the transmission of the prestressing force into the concrete. The force transfer unit and the deviation cone ensure the correct deviation of the strands from the anchor head to the duct.
Parameter For Post-tensioning Anchor:
According to the diameter of PC strand can be divided into YM12.7, YM13, YM18 type anchorage, the anchoring system is mainly applicable to the strength of 1860MPA-2000Mpa and below the level of 12.7mm, 12.9mm, 15.24mm, 15.7mm, and 17.8mm as the standard strength of steel strand of 5mm-7mm high strength steel beam 1670Mpa. Wide range of options, YM is suitable for design of tension anchor system between 0-12000KN, the number of steel strand range is 55;
post tension anchor Including the M series steel wire tension and anchor system: M13 (anchorage for 12.7-12.9mm steel strand and anchorage (M15) used in 15.2-15.7mm steel wire) with YCW series Jack and ZB4-500 type electric pump for tension; for flat structure BM13 and BM15 flat anchorage for cyclic stress; the structure of the HM13 and HM15 ring anchor.
FAQ:
Q1: Are you a factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support according to your needs.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equipment.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
Q11: What is your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Our Company Information:
We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
Ultra Large Rock Splitter
Submersible Drilling Rig
Spraying Machine
Grinding Machine
About Our Factory:
About the products:
Packing and Shipping:
Why you choose us:
1. We are a real factory offering products and provide free technical advice.
2. Company in business for many years and served Over 50 countries customers.
3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
){kind=link}