Description of hydraulic electric oil pump:
An electric oil pump is the power resource and control device for wire tension, which is used in conjunction with various jacks(Nom. Pressure 50-60MPa), as well as other low-flow or high-pressure hydraulic equipment.
In the case of a variety of special equipment, can be achieved lifting, bending, straightening, extrusion, riveting, demolition, pressure, and other work requirements, With a small volume of lightweight, simple structure, easy operation, and high working pressure.
ZB series of high-voltage electric pump tension pump rated power is high pressure, safe, high efficiency, such as the characteristics of the pump, and a variety of different supporting equipment used in prestressed, and in the need for oil-powered operations can be Widely used. For example, the corresponding equipment and equipment, can be carried out, stretching, expansion, clamping, bending, jacking, extrusion, and other basic operations, can also be sent to the wire crimping, steel crimping, reinforced concrete piles Pressure pile, and pile test and other engineering operations, the prestressed oil pump can be installed according to user requirements safety valve, relief valve, and three four-way valves, flexible and easy to use safe and reliable.
Parameters of Post-tension Stressed Pump:
| model |
preset pressure(Mpa) |
Limited Data(L/min) |
quality(Kg) |
Dimensions(mm) |
| ZB2X2-50 |
50 |
2X2 |
120 |
745X494X1025 |
| ZB2X1.5-63 |
63 |
2X1.5 |
125 |
745X494X1025 |
| YBZ2-2/50 |
50 |
2X2 |
123 |
825X494X1000 |
| YBZ2-1.5/63 |
63 |
2X1.5 |
127 |
825X494X1000 |
Safe for Tensioning /prestressed electric oil pump
(A) power wiring to be connected to the zero line, and at any time to check the insulation at all times, so as to avoid electric shock; users should always check the power cord connection or the beginning of contact is reliable, to prevent the motor due to lack of operation and burned.
(B) tubing and joints to be manufactured according to specifications, and at any time to check, so as to avoid a burst accident, the oil pump pressure can not be disassembled from joints, piping, and oil table.
(C) the pressure gauge is to be checked at any time to prevent failure caused by the accident.
(D) should be opened before driving the control valve (no load start). Use should check the safety valve to adjust the pressure if appropriate, and often ensure sensitive and reliability.
(5) installed in the upper body of the bearings should be a timely replacement of lubricants according to the situation.
(6) When the oil level is too low, the flat surface bearing of the pump body shall not work for a long time when the soil surface is exposed.
){kind=link}
){kind=link}