Multi-Strand Concrete Prestressed Permanent Anchorage

• Customization: Available
• After-sales Service: Contact with E-Mail, Video, What′s APP
• Warranty: One Year
• Model NO.: ZT
• Certification: CCC, CE
• Surface Treatment: No
• Technics: Moulding Plastic
• Material: Plastic
• Type: Insulating Tape
• PC Strand: 1-15holes
• Anchorage Shape: Round or Flat
• Dimension: for 12.7mm, 12.9mm, 15.1mm, 15.9mm. PC Strand
• Wedge Form: 2 Chip or 3 Chips
• Transport Package: Wooden Box
• Specification: steel
• Trademark: ZHONGTUO
• Origin: China
• Production Capacity: 10000pieces/Month
• Package Size: 100.00cm * 75.00cm * 80.00cm
• Package Gross Weight: 50.000kg

Product Description

Product Description

 

General anchorage construction and installation method
The general anchorage construction and installation method are to put a small number of explosives at the bottom of the hole, expand it into a spherical shape after several anchorage constructions and installations, and finally put the explosives into the anchorage construction and installation. Compared with the hole anchorage construction and installation method, this method has the advantages of good anchorage construction and installation effect, high work efficiency, fast progress, and low consumption of explosives. This method is often used in the construction and installation of short pile anchors for shallow foundations.
 

Product Parameters

 

Technical data of YJM13 Anchorage
Specification	Anchor Head		Bearing Plate		Duct	Spiral Reinforcement				Stressing Jack
	ΦA	B	Square	Round	ΦE(ID)	ΦF	H	ΦG	N
			C*D	ΦC*D
YJM13-1	38	40	80×10	-	35	80	30	6	3	QYC270
YJM13-2	76	42	115×80	120×80	45	120	40	8	3	YDC1100
YJM13-3	83	42	120×80	130×80	50	120	40	10	3	YDC1100
YJM13-4	87	42	130×87	135×85	50	135	50	10	3	YDC1100
YJM13-5	97	42	140×92	140×100	55	140	50	10	4	YDC1100
YJM13-6	107	45	150×97	150×125	60	160	50	12	4	YDC1100
YJM13-7	107	45	150×97	150×125	60	160	50	12	4	YDC1100
YJM13-8	117	45	165×115	165×135	60	170	50	12	4	YDC1500
YJM13-9	127	48	175×125	175×140	70	180	50	12	4	YDC1500
YJM13-10	136	48	180×130	180×150	80	200	50	14	4	YDC2500
YJM13-11	138	50	180×130	180×150	80	200	50	14	4	YDC2500
YJM13-12	143	50	190×140	190×150	80	210	50	14	5	YDC2500
YJM13-13	147	53	190×140	190×150	80	210	50	14	5	YDC2500
YJM13-14	153	53	195×150	200×160	80	220	50	14	5	YDC2500
YJM13-15	157	55	195×150	200×160	90	220	50	14	5	YDC2500
YJM13-16	167	55	210×160	210×185	90	240	60	16	6	YDC2500
YJM13-17	172	58	220×175	235×185	90	240	60	16	6	YDC3500
YJM13-18	176	58	235×175	235×185	90	260	60	16	6	YDC3500
YJM13-19	176	58	235×175	235×185	90	260	60	16	6	YDC3500
YJM13-20	196	60	270×185	260×200	90	270	60	16	6	YDC3500
YJM13-21	196	63	270×185	260×200	90	270	60	16	6	YDC3500
YJM13-22	196	65	270×185	260×200	90	270	60	18	6	YDC3500
YJM13-23	206	65	295×245	275×260	100	280	60	18	6	YDC4000
YJM13-24	206	68	295×245	275×260	100	280	60	18	6	YDC4000
YJM13-25	216	68	300×260	275×290	100	290	60	18	6	YDC4000
Technical data of YJM15 Anchorage
Specification	Anchor Head		Bearing Plate		Duct	Spiral Reinforcement				Stressing Jack
	ΦA	B	Square	Round	ΦE (ID)	ΦF	H	ΦG	N
			C×D	ΦC×D
YJM15-1	43	46	80×12	80×20	35	80	30	8	4	QYC270
YJM15-2	83	48	130×85	135×80	50	120	40	10	4	YDC6500
YJM15-3	87	48	130×87	135×85	50	120	40	10	4	YDC650
YJM15-4	97	48	140×92	140×100	50	140	50	10	4	YDC1100
YJM15-5	107	48	150×97	150×120	55	150	50	10	4	YDC1100
YJM15-6	122	50	165×115	165×135	70	170	50	12	4	YDC1500
YJM15-7	122	50	175×125	175×135	70	170	50	12	4	YDC1500
YJM15-8	137	53	180×130	180×150	80	190	50	12	4	YDC2500
YJM15-9	147	53	190×140	190×150	80	200	50	12	4	YDC2500
YJM15-10	157	53	195×150	210×160	90	210	60	14	4	YDC2500
YJM15-11	157	55	210×160	210×160	90	210	60	14	4	YDC2500
YJM15-12	167	55	210×160	210×185	90	230	60	14	4	YDC2500
YJM15-13	177	55	220×175	210×185	90	230	60	14	4	YDC3500
YJM15-14	177	58	225×175	235×185	90	240	60	14	4	YDC3500
YJM15-15	187	60	235×175	235×185	90	260	60	16	5	YDC3500
YJM15-16	187	60	240×175	235×185	90	260	60	16	5	YDC3500
YJM15-17	197	63	250×185	265×200	100	280	60	16	5	YDC4000
YJM15-18	197	63	270×185	265×200	100	280	60	16	5	YDC4000
YJM15-19	197	63	270×185	265×200	100	280	60	16	5	YDC4000
YJM15-20	217	68	295×245	285×260	120	290	60	16	5	YDC5000
YJM15-21	217	70	295×245	285×260	120	290	60	16	5	YDC5000
YJM15-22	217	70	295×245	285×260	120	290	60	18	5	YDC5000
YJM15-23	237	73	310×260	320×260	120	320	60	18	5	YDC5000
YJM15-24	237	75	310×260	320×260	120	320	60	18	5	YDC5000
YJM15-25	237	78	310×300	320×300	120	330	70	18	5	YDC6500

 

Installation Instructions

 

1. The anchors should be kept properly, and there should be no rust, water, and other sundries in use.
2. Apply lubricant on the outer surface of the tool clip and the inner surface of the taper hole of the anchor plate before use, and often remove the debris on the surface of the clip.
3. Safety measures should be taken during tensioning, and no one can stand after the tensioning jack.
4. The anchor system should be used together and cannot be mixed with other systems.

Company Profile

 

Shaanxi Zhongtuo Mining Equipment Company was founded in 2005 in Xi'an, Shaanxi Province, It is a foreign trade company specializing in the research, development, and sales of machinery and equipment in the fields of , , , and .
With the improvement of high-quality products and good services, our products are trusted and appreciated by customers from all over the world. Currently, our customers are all over Russia, Thailand, Romania, Bulgaria, Albania, Colombia, Brazil, Peru, Uruguay, Saudi Arabia, Kuwait, United Arab Emirates, Oman, Turkey, Israel, Kazakhstan, India, and many other countries.

About Certifications

Packaging & Shipping

 

FAQ

 

Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit.
 
Q2: How much tonnage can a bridge jack lift??
A2:  The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you.       

Q3: How many meters is the connection between the jack and the oil pump?
A3: The factory standard is two meters. If you need longer, we will make it for you.
                                                                                                                     
Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is a 50 MPa 3 kW oil pump and a 60 MPa 4 kW oil pump.

Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.
 
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support according to your needs.

Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.
 
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.

Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.