Product Description
ZT Hydraulic Strand Jack with Synchronous Lifting System
Strand lifting Jack is a system similar to a jack. Hydraulic Strand Jack can raise important things from low to high, and Hydraulic Strand Jack can lower heavy things. If the weight is lifted, the strand is not pushed up, but the jack pulls up a bunch of strand, which is called the strand pulling system. The system has two clamps: the lower clamps are fixed and the upper clamps are connected to a hydraulic cylinder that can be moved up and down. Both clamps hold a strand of steel. To start lifting the bottom jig release the strand and the top jig is pushed hydraulically while gripping the strand and therefore also moving. Then clamp the steel strand at the bottom, release the top clamp, and the hydraulic cylinder retracts. Once fully retracted, the top clip grabs the wire again and the bottom clip is released. By repeating this sequence, the strand is raised. The same goes for using a jack to lower a heavy object.
Product Parameters
Technical Parameter of Synchronous strand lift jack
model |
Safe working load |
Working pressure
MPA |
Cylinder stroke
mm |
Retraction height
mm |
Jack weight
KG |
Fixed anchor weight
KG |
boost speed
m/h |
Number of strands |
Strand diameter |
ZT-TSD15 |
15 |
31.5 |
500 |
1846 |
148 |
3.2 |
0-25 |
1 |
18 |
ZT-TSD45 |
45 |
31.5 |
500 |
1726 |
600 |
28 |
0-25 |
3 |
18 |
ZT-TSD60 |
60 |
31.5 |
500 |
1726 |
630 |
32 |
0-25 |
4 |
18 |
ZT-TSD100 |
100 |
31.5 |
500 |
1790 |
930 |
46 |
70-25 |
7 |
18 |
ZT-TSD180 |
180 |
31.5 |
500 |
1886 |
1560 |
90 |
0-25 |
12 |
18 |
ZT-TSD280 |
280 |
31.5 |
500 |
1938 |
2330 |
130 |
0-25 |
19 |
18 |
ZT-TSD300 |
300 |
31.5 |
500 |
1940 |
2460 |
140 |
0-25 |
20 |
18 |
ZT-TSD400 |
400 |
31.5 |
500 |
2100 |
3396 |
220 |
0-25 |
27 |
18 |
ZT-TSD580 |
580 |
31.5 |
500 |
2220 |
4980 |
260 |
0-25 |
38 |
18 |
ZT-TSD680 |
680 |
31.5 |
500 |
2180 |
5410 |
320 |
0-25 |
45 |
18 |
ZT-TSD800 |
800 |
31.5 |
500 |
2200 |
6880 |
360 |
0-25 |
54 |
18 |
ZT-TSD1000 |
1000 |
31.5 |
500 |
2286 |
8520 |
560 |
0-25 |
66 |
18 |
Product Features
- Do not be restricted in weight, span or by extended combination of lifting equipment.
- As long as there is a reasonable load-bearing hanging point, lifting height is not restricted.
- Liftting anchor possesses reverse movement sely-locking function, which makes the lifting process safe and the component can be locked reliably at any position for a long time during the lifting process.
- Small in size and weight, large in capacity, suitable for use in confined spaces or lifting high tonnage compoments indoor.
- High automation, easy and flexible operation, good security, high relibility, wide application, versatility.
Product applications
Bridge Tension Jacks
Company Profile
Shaanxi Zhongtuo Mining Equipment Company was founded in 2005 in Xi'an, Shaanxi Province, It is a foreign trade company specializing in the research, development, and sales of machinery and equipment in the fields of mining, bridges, pavements, and tunnels.
With the improvement of high-quality products and good services, our products are trusted and appreciated by customers from all over the world. At present, our customers are all over Russia, Thailand, Romania, Bulgaria, Albania, Colombia, Brazil, Peru, Uruguay, Saudi Arabia, Kuwait, United Arab Emirates, Oman, Turkey, Israel, Kazakhstan, India, and many other countries.
About Certifications:
Packing and Shipping:
FAQ
Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit.
Q2: How much tonnage can a bridge jack lift??
A2: The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you.
Q3: How many meters is the connection between the jack and the oil pump?
A3: The factory standard is two meters. If you need longer, we will make it for you.
Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is a 50 MPa 3 kW oil pump and a 60 MPa 4 kW oil pump.
Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support according to your needs.
Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.