| Customization: | Available |
|---|---|
| After-sales Service: | Video Communication |
| Warranty: | 1year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Description
All-aluminum alloy gearbox and gear-driven planetary head reduce noise and improve surface flatness.
The S-shaped shelf design allows for a larger angle to be seen when changing the grinding disc, and the grounding is more stable.
Advantages
1. The low center of gravity design of the machine greatly improves the operating comfort and stability during high-load construction.
2. With leakage protector, greatly improving the safety of operators.
3. The fuselage is compact and flexible in operation, so it is not limited by the size of the construction site, and there is no dead angle between the fuselage and the wall during construction.
Floor Grinder Parameters
| Model |
12T-540
|
12T-640
|
|
Voltage
|
220V | 220V |
|
Phase
|
1/3Phrase | 1/3Phrase |
|
Power
|
4KW(5ph) | 7.5KW(5ph) |
|
Frequency
|
50/60HZ | 50/60HZ |
|
Working width
|
540mm | 630mm |
|
Disc quantity
|
6 | 12 |
|
Rotating speed
|
1000-1800rpm | 1000-1800 |
|
Water tank volume
|
36L | 60L |
|
Weight
|
155kg | 290 |
Pavement Equipment
Preparation for floor grinder
1. Must be connected with an electric protector and earth.
2. Cables must not be damaged or damaged. Wires need to use the national standard of 8 square meters and above
3. Adjust the height of the operating handle so that the machine can be pulled down to the best state. Pull the handle down and raise the whole base.
4. Whether the discs of the hand disc are flexible, check whether the fastening bolts are loose, and check whether the gaps of the discs are even.
5. The bottom of the machine is magnetic, only need to adsorb the diamond tool or the adapter that absorbs the adhesive resin grinding disc.
6. Check if the machine leaks when lying flat or vertical.
7. Check whether the indicator light ( on the back) is on after power is on, and the panel parameters are displayed normally.
8. If dry grinding, please connect the vacuum cleaner and connect to the suction port to ensure that the suction pipe has no air leakage. If wet grinding, be sure to full fill the floor with water. Do not only wet the floor in order to reduce dust, so that the resistance during the flooding process is abnormal and the motor load is overloaded.
9. Turn on the start switch and run from low speed to high speed to see if the machine is running smoothly. The speed is adjusted according to the ground conditions, and the general condition is 800-1800 rpm. Remember not to polish at low speed, especially on extremely poor ground. Low speed may work, that causing the motor to overheat and burn out.
Company Profile
Our TeamFAQ:
){kind=link}