Shaanxi Zhongtuo fully automatic fixed solar panel cleaning robot is an automated equipment specially used for cleaning solar panels
The characteristics of our machine are
1. Reliable performance: lithium battery and brushless motor are used, which is durable.
2. Fully automatic operation: automatic start and stop, automatic return, and adaptive working environment.
3. Self-contained power supply system: charged by solar energy, independent power supply, strong endurance, and can last for 8-10 hours.
4. Clean and efficient: equipped with special brushes, clean and clean, a single machine can clean 1.2MWp/day.
5. High cost performance: low cost and fast return.
6. Wide range of applications: adapt to a variety of areas and terrains, such as roofs, greenhouses, plains, hills, deserts, lakes, etc., and the control system has a high protection level.
7. Can work all day: adapt to the ambient temperature range of -40ºC-+70ºC.
8. Good cleaning effect: The cleaning efficiency is above 95%, and the soft spiral brush is used, which will not damage the tempered glass on the surface of the photovoltaic module.
9. Intelligent function: Equipped with a wireless module, it can realize remote control and telemetry functions, with two operating modes: fully automatic remote control and on-site manual control, which can be switched between each other. It can also be equipped with an infrared temperature sensor group to measure the temperature of the photovoltaic panel silicon wafer and analyze the power generation of the single panel.
This product can be suspended on photovoltaic modules and is suitable for photovoltaic power stations within 0-60°. Compared with traditional electric tools or crawler cleaning robots that clean line by line, this product can clean in one go, breaking through terrain restrictions and increasing cleaning efficiency by more than 80%, which can be called the efficiency ceiling among photovoltaic cleaning products. It is suitable for mountainous, centralized, fishery, agricultural and other power station types, achieving large-area, high-angle, and efficient cleaning;
Product Model |
ZTG-3318 |
Product Name |
Fixed Fully automatic cleaning robot |
Standard width |
400 mm |
Standard height |
215 mm |
length |
Customizable |
weight |
/ |
Power Mode |
Lithium battery, charging photovoltaic panel |
Charging photovoltaic panel power |
520W/20V |
Battery power |
24V/10A |
Time required to fully charge the battery |
10 Hour |
Battery life |
8 Year |
Motor power |
690 W |
Brush hardness |
SHORE-A30 |
Controller |
industry PC (self-developed) |
Network access |
4G |
Design life |
6 Year |
|
|
Dry brush working mode |
Cleaning speed |
26m/min |
Maximum one-way distance |
600 m |
Adapt to temperature |
-20 ~ 80 ºC |
Boot method |
Automatic startup at a scheduled time |
Control Mode |
Automatic, manual, remote control |
Control Platform |
Remote service platform + mobile phone APP |
Night work |
support |
1. High cleaning efficiency
2. High degree of intelligence
3. Comes with solar power generation, charging and storage devices, self-powered without external power supply, works around the clock
4. Strong adaptability, suitable for a variety of areas and terrains
5. Automatic/manual control modes, manual mode can be controlled remotely
6. Automatic cleaning time and frequency can be set independently according to region or season.
7. Automatic speed stabilization, the forward speed of the equipment matches the speed of the brush motor to improve cleaning quality
8. High waterproof, dustproof and anti-fog levels
9. Equipment components are standardized, easy to transport, install, and debug, and parts are easy to replace.
Installation Instructions
Automatic Cleaning:
The robot can set cleaning modes through a remote control or mobile app, independently adjusting between dry or wet cleaning
modes, as well as the cleaning time and frequency.
Lightweight splicing design for more flexible handling
Our machine adopts lightweight design, three stage split splicing structure,the weight of the whole machine is about 66kg (e.g., 1650 single row), the upper end of the robot and the bottom are preset with notches, one person can use the telescopic rod to insert the jacking,and the two people can place it on the photovoltaic module, and realize the flexible use of multiple arrays, multiple terrains and multiple sites through manual handling, so as to maximize the value of the product.

Special Brush Cleaning:
Featuring a high-speed roller brush made of specially designed polymer materials, it quickly cleans the surface of solar panels
effectively without causing damage to the photovoltaic panels.
The product is a self-developed embedded software and hardware system, which realizes lP65 waterproof protection,motor overload protection, motor slow start protection, lithium battery overload protection, lithium battery short circuit poweroff protection, and stable operation in harsh environments making the product more reliable.
Why we need clean solar panels?
The dust accumulation of the module will reduce reduce the power generation of modules, easily damage pv modules, increase safety risks, and reduce its life.
Travel at low speed to clean heavy dirt
High-speed travel improves cleaning efficiency
The X6 realizes the remote control adjustment of three levels of travel speed, with a maximum of 15m/min, which can be adjusted to 10m/min or 5m/min, and can travel at low speed for heavily polluted photovoltaic panels, such as guano, to achieve deepcleaning; Light dust can travel at high speeds, improving cleaning efficiency.
Cross the bridge across a large
spacing bracket
Cleans faster
When the spacing of adjacent photovoltaic arrays is large and the array is relatively neat, the product is equipped with two sets of retractable bridge brackets, which are respectively built at the top and bottom of the array spacing to assist in crossing the bridge, which does not require frequent handling, and the cleaning efficiency is greatly improved;The default standard configuration can exceed the maximum spacing of 50cm, and the larger width can be customized;
Active Drop Arrest System is safer
The X6 robot is equipped with 4 high-precision sensors at the upper and lower ends,which will automatically stop when traveling left/right to the blank area on the edge of the photovoltaic panel,and can operate the remote control to driveaway in the opposite direction to avoid falling.
7 days no reason to return or exchange
7 days of broken free replacement
30-day emergency reissue (no need to wait for the return,send you a new one first)
1 year free warranty (the specific details are based on the warranty terms of the manual)
5-year warranty for core components, quality problems are only replaced and not repaired (except for the fuselage shell, nonhuman subject to the actual situation)
Shaanxi Zhongtuo Photovoltaic cleaning Robot is a high-tech enterprise dedicated to providing efficient and intelligent cleaning solutions for the photovoltaic power generation industry. The company focuses on the research and development, production and sales of photovoltaic module automatic cleaning robots, aiming to improve the power generation efficiency and operation and maintenance convenience of photovoltaic power stations through technological innovation.
Since its establishment, Shaanxi Zhongtuo has always been adhering to the concept of "green energy, intelligent operation and maintenance", actively responding to the national call for new energy development, and constantly exploring and practicing cutting-edge technologies in the field of clean energy. The company's core product, photovoltaic cleaning robot, adopts advanced navigation and positioning system, intelligent identification technology and adaptive cleaning mechanism, which can efficiently complete the cleaning work of photovoltaic panels in various complex environments, effectively remove dust, bird droppings and other pollutants, and significantly improve the photoelectric conversion efficiency of photovoltaic power stations.


Q1:Are you factory or trading company?
A:We are professional manufacturer with more than 3600 square meters, about 100 workers.
Q2:Can you do OEM for me?
A:Yes, we accept OEM and ODM both.We have been designing for the world top EPC,distrubutor all the time.
Q3:Can you provide samples to check the quality before placing an order?
A:Sure, we can provide free samples and send them to you by international courier, and you can receive them in about a week after sending. Samples are free, you just need to provide the shipping fee.
Q4:What Payment Terms are your company accepted?
A:Usually,we accept Paypal,T/T,Westerm Union,L/C(At sight of total amount).If the order amount is more than 10,000 US dollars, you can pay 50% in advance and 50% before shipment.
Q5:Do you have any MOQ limit?
A:We don't have a request on MOQ, 1pc for sample checking is available.
Q6: How do you ship the goods and how long does it take to arrive?
A:Small quantity of products, usually delivered by DHL, UPS, FedEx. It usually takes 5-7 days to arrive. Ordinary orders usually shipped by sea. It will take 7-45 days to arrive, depending on distance.
Q7: Is it OK to print my logo on products?
A: Of course.We can provide customized services, only need you to provide drawings, can be exactly according to your needs.